Tools / Cost calculator

CNC machining cost calculator

Get an instant per-part estimate from material, size, complexity, tolerance, finish and quantity — before you send a drawing.

Estimated price

$10.43 / part

Range $7.82 – $14.08 per part

Order total
$104.29
Machining time / part
3 min
Stock volume
180 cm³
Lead time (est.)
6 working days

Indicative estimate for a solid part with the selected complexity, using standard tooling and a shop rate you can adjust. Real quotations depend on drawing detail, fixtures and material availability — send your STEP/PDF drawing for a free 24-hour quote.

Get an exact quote

How the estimate is built

The calculator multiplies the stock volume by a removal factor for the selected complexity, divides by the material removal rate to get machine minutes, then adds programming and fixturing time. Material cost comes from density and price per kilogram; tolerance and finish apply multipliers that reflect the extra operations and inspection they require.

Cost elementHow it is modelled
MaterialBounding-box volume × density × price per kg (includes scrap allowance)
Machine timeRemoved volume ÷ removal rate × setup factor × tolerance factor
Programming & fixturing40 min base + 15 min per additional setup + 25 min CAM
Tolerance×1.0 general, ×1.25 at ±0.02 mm, ×1.6 at ±0.005 mm
FinishingPer-part charge + surface-area charge, e.g. anodizing 0.05 USD/cm²
Margin×1.25 to cover consumables, inspection, packaging

Removal rates assume carbide tooling on a 3-axis machining centre. Five-axis work, thin walls or hardened material reduce the effective rate, which is why real quotes can exceed the upper bound.

Cost calculator FAQ

How accurate is this CNC machining cost calculator?

The estimate is typically within ±30% of a real quotation for simple and medium-complexity parts. It models material volume, removal rate, setups, tolerance factor and finishing, but cannot see thin walls, tight datums or unusual fixturing — those are confirmed from the drawing.

What drives CNC machining cost the most?

Machine time and setup dominate. For one-off parts, setup is often 40–60% of the price; for 100+ pieces, material and cycle time dominate. Tight tolerance (below ±0.02 mm) and fine surface finish each add 20–40% because they require extra operations and inspection.

Why does quantity change the unit price so much?

Programming and fixturing are one-time costs. Spread over 1 piece they dominate; spread over 100 pieces they become small. That is why the same part can cost 3–5× more as a single prototype than in a 100-piece batch.

Is the shop rate the same as the final price?

No. The calculator multiplies machining cost by a 1.25 factor to cover consumables, inspection, packaging and margin. You can change the shop rate to match your own benchmark or a quote you received elsewhere.