Blog / How to read a CNC machining quote: 7 line items explained
How to read a CNC machining quote: 7 line items explained
What each line actually pays for, which ones you can influence, and how to compare suppliers fairly
KaiMi Engineering Team · · 6 min read
Two quotes for the same drawing can differ by 40%, and the reason is rarely the hourly rate. The difference is usually in setup, material specification, finishing, inspection level and shipping terms. This breakdown shows what each line in a machining quote covers, so you can compare offers on equal terms instead of on the bottom line alone.
1. Material
Material is usually quoted at the ordered weight plus a scrap allowance, which depends on how the part is nested. A part machined from bar stock has a different allowance than one cut from plate.
Ask whether the grade is certified (EN 10204 3.1 mill certificate) and whether the quote includes it. Certified 316L can add 5–10% to material cost, but medical and food customers usually require it.
2. Programming and setup
One-off parts carry the full cost of CAM programming, fixture design and machine setup. That is why a single prototype can cost more than five identical parts.
If you expect repeat orders, say so. Suppliers can amortise setup differently or invest in a dedicated fixture, which reduces later unit prices significantly.
3. Machining time
This is cycle time multiplied by the machine rate. Cycle time is driven by material removal volume, tolerance, surface finish and the number of setups (each side that must be re-fixtured).
A part with features on five faces usually needs three to five setups; redesigning so most features are reachable from two faces can cut cycle time by 20–30%.
4. Finishing
Anodizing, powder coating, plating, passivation and laser marking are usually subcontracted or run as a separate batch, so they add both cost and lead time — typically 2–5 working days.
Specify finish only where it is needed. A bead-blasted cosmetic surface and a hard-anodized wear surface are different processes with different prices.
5. Inspection and documentation
A standard quote includes dimensional checks and a report. Full CMM inspection of every part, PPAP, FAI or CPK packages are extra and should be a separate line.
For medical and automotive customers, ask for the FAI/PPAP scope in writing; it is the most common source of post-order cost surprises.
6. Packaging and freight
Export packaging (rust prevention, custom labels, foam, wooden crate) is often quoted separately. Air freight is charged on volumetric weight, so bulky packaging can cost more than the parts.
Check the Incoterm: EXW means you arrange everything; DDP means the supplier delivers duty-paid to your door. Comparing an EXW quote with a DDP quote is not a like-for-like comparison.
7. Tooling and one-time charges
Injection molds, special fixtures and custom gauges are one-time charges. Ask whether tooling is dedicated to your part, who owns it, and under what conditions it is returned or transferred.
How to compare two quotes fairly
- Normalise the Incoterm: convert both to DDP or both to EXW before comparing.
- Confirm the material grade and whether certificates are included.
- Confirm the inspection level (sample, 100%, CMM, PPAP) line by line.
- Check the quoted lead time start point — drawing approval? deposit? material arrival?
- Ask what is excluded: finishing, packaging, freight, duties, tooling.
- For repeat parts, ask for the price at 10, 100 and 1,000 pieces — the curve tells you where setup stops dominating.
Red flags in a quote
- A price far below the others with no explanation of process or material.
- No inspection report offered, or "inspection on request" only.
- Lead time shorter than the declared process time (for example 3 days for a part needing heat treatment and grinding).
- No stated Incoterm, currency or payment terms.
About the author
KaiMi Engineering Team — 30+ mechanical engineers and quality inspectors at our Dongguan plant, writing about machining capability, tolerances and sourcing for OEM buyers. More about KaiMi.
Frequently asked questions
Why are prototype quotes so much higher per part?
A single part carries the full programming, fixture and setup cost, plus material bought in small quantity. Once setup is amortised over 50 or 100 parts, the unit price usually drops 40–70% for the same geometry.
Should I compare quotes on unit price only?
No. Normalise the Incoterm, material certification, inspection level and finishing scope first. A lower unit price with EXW terms and no inspection report often costs more once freight, duties and incoming inspection are added.
What does DDP mean on a machining quote?
Delivered Duty Paid: the supplier handles export clearance, freight, import clearance and duties, and delivers to your address. It makes comparison easy but usually carries a margin for freight and duty handling, so ask for the DAP price as well if you have your own broker.
Send your drawing for a free quote
Free DFM feedback and a drawing-based quotation within 24 hours. No minimum order quantity.