CNC machining materials
Which material fits your part? Compare machinability, achievable tolerance, surface finish and typical applications for the metals and plastics we machine every day.
Aluminium
Grades: 6061-T6, 7075-T6, 2024, 5083
The default choice for prototypes and enclosures: fast to machine, low cost, anodizes well. 6061 for general parts, 7075 for high strength.
Typical tolerance: ±0.01 mm standard, ±0.005 mm precision
Stainless steel
Grades: 303, 304, 316L, 17-4PH, duplex 2205
Corrosion resistance and strength for medical, food and marine parts. 303 is free-machining, 316L for aggressive environments.
Typical tolerance: ±0.01 mm standard, ±0.005 mm precision
Titanium
Grades: Grade 2, Grade 5 (Ti-6Al-4V), Grade 9
High strength-to-weight ratio for aerospace and medical implants. Slow cutting speeds, careful tool wear and heat control required.
Typical tolerance: ±0.01 mm standard, ±0.005 mm precision
Tungsten carbide
Grades: YG8, YG15, YG20, HRA 88–92
Extreme wear resistance for mold inserts, punches and dies. Machined by wire EDM and diamond grinding only.
Typical tolerance: ±0.002 mm (EDM/grinding)
How material choice changes the process
| Material | Machinability | Best process | Typical lead time |
|---|---|---|---|
| Aluminium 6061 | Excellent | CNC milling / turning | 3–7 days |
| Stainless 303 | Good | CNC turning | 3–7 days |
| Stainless 316L | Moderate | Milling / turning + passivation | 5–10 days |
| Titanium Grade 5 | Difficult | Milling with carbide tooling | 7–15 days |
| Tungsten carbide | Only EDM / diamond grinding | Wire EDM + grinding | 7–15 days |
| PEEK / POM | Good | CNC milling / turning | 3–7 days |
Tolerances follow ISO 2768 where the drawing does not specify otherwise; surface roughness is measured per ISO 4287. See the tolerance guide for process-by-process capability.
Not sure which material to choose?
Send the drawing and the application (load, environment, weight limit) — we recommend the material and finish, then quote within 24 hours.
Ask an engineer