CNC machining prices
Typical price ranges in USD for parts machined in Dongguan, China — so you can budget before sending drawings. Exact quotations are free and returned within 24 hours.
Price ranges per part (USD)
| Process | Typical part | Qty 1–10 | Qty 100 |
|---|---|---|---|
| CNC milling (3/4-axis) | Bracket 50×50×10 mm, ±0.05 mm | $10 – $22 | $5 – $9 |
| CNC milling (5-axis) | Complex housing 100×80×40 mm | $45 – $120 | $28 – $70 |
| CNC turning | Shaft Ø20×80 mm, ±0.02 mm | $4 – $12 | $2.5 – $7 |
| Wire EDM | Punch 60×60×20 mm, hardened steel | $18 – $45 | $12 – $30 |
| Surface / cylindrical grinding | Plate 100×100 mm, ±0.002 mm | $9 – $25 | $6 – $16 |
| Anodizing (clear / black) | Part up to 100 cm² surface | $0.60 – $2.00 | $0.40 – $1.20 |
| Bead blasting | Part up to 100 cm² surface | $0.40 – $1.00 | $0.25 – $0.70 |
Ranges assume aluminium 6061 unless stated, standard tooling and ISO 2768-m general tolerance. Stainless steel is typically 2.2–3.2× the aluminium price, titanium 4–8×. Prices exclude setup, finishing, inspection documentation, packaging and freight.
One-time and additional costs
| Item | Typical cost | Notes |
|---|---|---|
| Setup & programming | $90 – $150 per part number | One-time, waived on repeat orders where tooling exists |
| Injection mold tooling | from $1,800 | Single-cavity, simple part; multi-cavity quoted per drawing |
| Injection molded parts | from $0.25 per part | Depends on material, weight and cavity count |
| Hard anodizing | $1.20 – $3.50 per part | 25–50 µm, wear-resistant surface |
| PPAP / FAI documentation | $80 – $250 | Per part number, depending on scope |
| Export packaging | $15 – $40 per carton | Rust prevention, foam, custom labels |
| Air freight (DHL/FedEx) | from $45 per shipment | 5–7 days to USA/EU; sea freight from $120 |
What changes the price
- •Removed material volume — the single largest driver of machine time
- •Tolerance below ±0.02 mm — adds 25–60% for extra passes and inspection
- •Surface finish below Ra 0.8 µm — adds grinding or polishing operations
- •Number of setups — every extra face re-fixtured adds cost
- •Material — stainless 2.2–3.2×, titanium 4–8× aluminium
- •Quantity — setup amortisation drops unit price 40–70% at 100 pcs
- •Documentation — PPAP, FAI, CMM reports are quoted separately
- •Freight terms — EXW, DAP or DDP change the landed cost by 5–15%
Pricing FAQ
How much does CNC machining cost per part?
For simple aluminium parts in a batch of 100, typical prices are $2.5–$9 per part. Complex 5-axis parts, stainless steel or titanium cost $28–$120. The biggest drivers are removed volume, tolerance, material and quantity — setup is amortised over the batch.
Is there a minimum order quantity?
No. One piece is the minimum order, which is why prototypes carry the full programming and fixturing cost. The same part in a 100-piece batch typically costs 40–70% less per unit.
What extra costs should I expect besides the part price?
One-time setup and programming of $90–$150 per part number, finishing (anodizing, plating, powder coating), inspection documentation such as PPAP or FAI, export packaging around $15–$40 per carton, and freight. Tooling for injection molding starts at about $1,800.
How long does a quotation take?
Free, based on your 2D/3D drawing, and returned within 24 hours. Send STEP, IGES, DWG, DXF or PDF drawings to km@dgkaimi.com or WhatsApp +86 137 2997 7160.