Materials / Aluminium
Aluminium
Fast, economical and easy to anodize — the default material for prototypes, enclosures and heat sinks.
Aluminium is the most common material for CNC machined parts at KaiMi. It cuts quickly, holds ±0.01 mm without special setups, and anodizes into a durable decorative finish. Use 6061-T6 for general parts, 7075-T6 when strength matters, and 5083 for marine or welded assemblies. Typical lead time is 3–7 working days for prototypes.
Grades we machine
| 6061-T6 | General purpose. Good strength, excellent machinability, anodizes cleanly. The default for brackets, housings, plates and fixtures. |
|---|---|
| 7075-T6 | High strength (about 570 MPa tensile). Used for aerospace brackets, molds, and load-bearing components; less corrosion resistant than 6061. |
| 2024-T4 | High fatigue resistance for aerospace structures. Requires protective coating or anodizing because of lower corrosion resistance. |
| 5083 | Marine grade with excellent corrosion resistance and weldability. Used for frames, tanks and structural plates. |
| 6082 | European structural alloy, similar to 6061. Common for machine frames and automotive parts. |
Machining notes
Thin walls and chatter
Walls down to 0.8 mm are machined with progressive depth of cut, sharp carbide tooling and light finishing passes. For very thin sections we machine from both sides or add temporary support ribs.
Surface finish
As-machined finish is Ra 0.8–3.2 µm. A finishing pass reaches Ra 0.8 µm, and Ra 0.4 µm is available after anodizing or bead blasting. Visible tool marks can be removed with brushing or tumbling.
Heat and distortion
Aluminium expands about twice as much as steel per degree, so tight-tolerance parts are machined with coolant and checked at 20 °C. Large thin plates are stress-relieved before finishing.
Threads and inserts
We cut metric and imperial threads directly in aluminium, or install Helicoil and Keensert inserts where threads will be used repeatedly.
Capability and finishes
| Dimensional tolerance | ±0.01 mm standard; ±0.005 mm on precision features (CMM verified) |
|---|---|
| Surface roughness | Ra 0.8–3.2 µm as machined; Ra 0.4 µm with finishing |
| Maximum part size | Up to 1200 × 600 × 500 mm on 3-axis; larger on request |
| Lead time | 3–7 working days for samples; 7–15 working days for production |
| Minimum order | 1 piece — no MOQ |
Available finishes
- Clear anodizing
- Black anodizing
- Hard anodizing
- Color anodizing (RAL)
- Bead blasting
- Brushing
- Powder coating
- Laser marking
Typical applications
- •Electronics enclosures and heat sinks
- •Automotive brackets and housings
- •Automation and robot fixtures
- •Semiconductor equipment parts
- •Aerospace structural brackets (7075)
- •Marine frames and plates (5083)
Frequently asked questions
Is 6061 or 7075 better for my part?
Choose 6061-T6 unless you need higher strength or better fatigue performance. 6061 machines faster, anodizes more evenly and costs less; 7075-T6 reaches roughly 570 MPa tensile strength but is less corrosion resistant and needs protective coating.
What tolerance can you hold on aluminium?
Standard tolerance is ±0.01 mm, and precision features are held to ±0.005 mm with CMM verification. Thin walls and long plates are affected by thermal expansion, so we machine with coolant and inspect at 20 °C.
Does anodizing change the dimensions?
Yes — anodizing grows the surface by roughly half the coating thickness per side. For tight-tolerance parts we leave a machining allowance and compensate so the finished part stays inside the drawing limits.
Send your drawing for a free quote
Aluminium parts machined to your drawing, from 1 piece. Quote and DFM feedback within 24 hours.