Materials / Stainless steel
Stainless steel
Corrosion resistance, strength and cleanability for medical, food and marine parts.
Stainless steel is specified when a part must resist corrosion, be cleaned repeatedly, or work in a marine or medical environment. Grade 303 is the free-machining choice for turned parts, 304 is the general-purpose grade, and 316L adds molybdenum for chloride and sterilisation resistance. Expect 5–10 working days for production orders, depending on finishing.
Grades we machine
| 303 | Free-machining austenitic grade with added sulphur. Fastest to turn, used for shafts, fittings and non-welded parts. |
|---|---|
| 304 / 304L | General purpose. Good corrosion resistance and formability for brackets, covers, food equipment and fasteners. |
| 316L | Molybdenum-bearing grade for chlorides, marine atmospheres and medical sterilisation. The standard choice for implants, surgical instruments and food processing. |
| 17-4PH | Precipitation-hardening martensitic grade. High strength after heat treatment, used for shafts, valves and aerospace components. |
| Duplex 2205 | High strength and chloride resistance for pumps, valves and offshore equipment. |
Machining notes
Work hardening
Stainless steel work-hardens quickly, so cutting speed, feed and coolant flow are controlled to keep the tool engaged. Slow, constant feed rates and sharp carbide inserts avoid a hardened skin that would blunt the next pass.
Passivation
After machining we passivate 304 and 316L (free iron removal, nitric or citric acid) to restore the oxide layer. Report and bath details are supplied with medical and food orders.
Medical and food compliance
For medical and food-contact parts we provide material certificates to EN 10204 3.1, Ra measurements and passivation records. Internal radii and surface finish are controlled to prevent bacterial retention.
Tool wear and cost
Stainless steel cuts 2–3 times slower than aluminium and consumes more tooling, which is reflected in the piece price. Selecting 303 instead of 304 can reduce turning cost by 20–30%.
Capability and finishes
| Dimensional tolerance | ±0.01 mm standard; ±0.005 mm on precision features |
|---|---|
| Surface roughness | Ra 0.8–1.6 µm as machined; Ra 0.4 µm after grinding or polishing |
| Typical finishes | Passivation, bead blasting, brushing, electropolishing, PVD coating |
| Lead time | 5–10 working days for production; 3–7 days for samples |
| Minimum order | 1 piece — no MOQ |
Available finishes
- Passivation
- Electropolishing
- Bead blasting
- Brushed finish
- Mirror polishing
- Laser marking
- PVD coating
Typical applications
- •Surgical instruments and implant components
- •Food processing equipment
- •Marine and offshore hardware
- •Chemical pump and valve parts
- •Pharmaceutical and cleanroom equipment
- •Fasteners and shafts (303)
Frequently asked questions
Should I use 304 or 316L stainless steel?
Use 304 for general indoor and food applications. Specify 316L when the part sees chlorides, salt spray, sterilisation or cleaning chemicals — the molybdenum addition resists pitting. 316L is also the more common choice for medical and pharmaceutical equipment.
Can you passivate and certify stainless parts?
Yes. We passivate 304 and 316L after machining and supply passivation records, material certificates to EN 10204 3.1 and surface roughness measurements. Electropolishing is available for ultra-clean and medical applications.
Why are stainless parts more expensive than aluminium?
Stainless steel machines 2–3 times slower, wears tooling faster and sometimes needs passivation. Choosing free-machining 303 for turned parts, or relaxing tight tolerances where they are not functional, reduces cost significantly.
Send your drawing for a free quote
Stainless steel parts machined to your drawing, from 1 piece. Quote and DFM feedback within 24 hours.