Resources / Tolerances
CNC machining tolerance guide
What each process can actually hold, how ISO 2768 general tolerances work, and where tighter tolerance stops paying for itself.
Process capability
| Process | Standard tolerance | Best achievable |
|---|---|---|
| CNC milling (3/4/5-axis) | ±0.01 mm | ±0.005 mm with CMM verification |
| CNC turning | ±0.01 mm | ±0.005 mm on precision fits |
| Surface / cylindrical grinding | ±0.002 mm | ±0.001 mm on size with tight process control |
| Wire EDM | ±0.002 mm | ±0.001 mm on precision features |
| Die-sinking EDM | ±0.01 mm | ±0.005 mm with electrode correction |
| Injection molding (plastic parts) | per drawing / DFM | tooling tolerance ±0.02 mm |
Values assume rigid parts in aluminium or steel, measured with a CMM rated to about ±0.003 mm. Thin walls, long parts and plastics need individual review.
ISO 2768 general tolerances (linear dimensions, mm)
| Nominal size range | ISO 2768-m (medium) | ISO 2768-f (fine) |
|---|---|---|
| 0.5 to 3 | ±0.1 | ±0.05 |
| over 3 to 6 | ±0.1 | ±0.05 |
| over 6 to 30 | ±0.2 | ±0.1 |
| over 30 to 120 | ±0.3 | ±0.15 |
| over 120 to 400 | ±0.5 | ±0.2 |
| over 400 to 1000 | ±0.8 | ±0.3 |
| over 1000 to 2000 | ±1.2 | ±0.5 |
| over 2000 to 4000 | ±2 | ±0.8 |
If the drawing states ISO 2768-m, dimensions without individual tolerance follow this table. Angular dimensions follow ISO 2768-1 as well; geometric tolerances follow ISO 2768-2 (class K or H).
Surface roughness by process
| Process | Typical Ra | Best case |
|---|---|---|
| CNC milling | Ra 0.8–3.2 µm | Ra 0.8 µm with finishing pass |
| CNC turning | Ra 0.8–1.6 µm | Ra 0.4 µm after grinding |
| Surface grinding | Ra 0.1–0.4 µm | Ra 0.05 µm with polishing |
| Wire EDM | Ra 0.4 µm | Ra 0.1 µm with multiple trim passes |
| Anodizing / coating | adds 5–50 µm | does not improve Ra |
Roughness is measured per ISO 4287 and reported as Ra unless Rz or Rmax is specified.
Where tolerance costs money
Tolerance below ±0.01 mm
Requires finishing passes, temperature control and 100% CMM inspection. Expect 15–40% higher piece price than ±0.05 mm work.
Surface finish below Ra 0.4 µm
Adds grinding, polishing or additional EDM trim passes; each step adds 1–3 working days.
Geometric tolerance (GD&T)
Position, parallelism and flatness callouts need dedicated fixtures and inspection; define datums explicitly so the requirement is measurable.
Tolerance FAQ
What tolerance should I specify on a CNC drawing?
Specify tolerance only where the function requires it. General dimensions can rely on ISO 2768-m, which covers ±0.1 mm up to 6 mm and ±0.2 mm from 6 to 30 mm. Tight tolerances of ±0.005 mm or less should be reserved for fits, sealing surfaces and mating features, because they add machining and inspection time.
What does ISO 2768-m mean on a drawing?
ISO 2768-m is the medium general-tolerance class for linear and angular dimensions that carry no individual tolerance. It covers roughly ±0.1 mm for small dimensions up to ±0.8 mm at 1000–2000 mm. ISO 2768-f is the fine class, about half the m values, and costs more because every dimension needs closer control.
Can you hold ±0.001 mm?
Not on a general machined feature. Wire EDM reaches ±0.001 mm on precision features and grinding holds ±0.002 mm, but the measurement itself has uncertainty: our CMM is rated to about ±0.003 mm. For features below ±0.005 mm we agree the measurement method with you before production.
Not sure which tolerance to call out?
Send the drawing — we flag tolerances that are expensive or impossible before quoting, free of charge.
Send drawing to km@dgkaimi.com